The semi-deep single-flap cross-country saddle provides an optimum close contact feel, excellent comfort, and correctly aligns the rider's pelvis while limiting shifts in the rider’s centre of gravity. This saddle is ideal for eventing.
For the rider, saddle SE09 provides a feeling of permanent contact with the horse which allows him to have more precise actions. Contact is unparalleled thanks to the single-flap and a lower cut of the saddle flap around the stirrup bars (only one layer of leather under the skirt). Front and back blocks ensure correct leg position.
For the horse, the wide panels are concave and integrated for better distribution of the saddle’s pressure along the horse's back.
The saddle opening around the shoulders frees up the horse's movements.
In order to protect the leather, it is essential to initially oil your saddle. At CWD, we carry out this process before delivering your made-to-measure saddle. No additional treatment is needed, and you can use it as soon as you receive it.
Beware of the risk of staining white clothes, especially during the first few uses.
Our accessories are delivered without having been oiled. Apply a large quantity of CWD oil or conditioner evenly and repeat if necessary to obtain the desired suppleness. Use the CWD glove to massage any excess conditioner into the leather. If possible, let the leather absorb the CWD conditioner for 24 hours in a well-ventilated room. Natural leathers will darken before lightening slightly to reach their definitive shade.
Before oiling or greasing your accessories, make sure to try them on your horse first. Accessories which have been greased cannot be returned.
The leathers used in saddle making are living materials and must be regularly cared for. Care treatments should be adapted to use and must take the climate and the season into account.
Here are two key steps to ensure your leathers remain comfortable and beautiful.
1. Clean, after each use using a sponge and CWD liquid glycerine soap to keep the leather supple, pleasant and high-performing.
2. Apply CWD conditioner at least twice a month on all the equipment, using the CWD glove. Don’t forget the stitching.
In summer, after each use, the leather needs to be treated to compensate for and repair the drying out caused by the sun and high temperatures.
In winter, a heated area is needed to combat the ambient humidity, which is damaging to its lifespan and can be a source of mould.
Avoid the following
As far as possible, avoid cleaning your leathers with products which contain solvents which will prematurely discolour the saddle and will dry out the leather fibres.
If your saddle has been in contact with water, dry the leather carefully by placing it in a warm room. Once dry, clean it and apply the CWD conditioner.
Do not grease a saddle which has not been cleaned first: you risk letting the dirt penetrate into the leather, damaging its appearance and shine.